PERANCANGAN MEKANISASI PANEN TANAMAN BATANG RUMPUT DENGAN PEMOTONG TIPE SIRKULAR MENGGUNAKAN PEMODELAN INVENTOR®
DOI:
https://doi.org/10.52453/t.v13i1.401Keywords:
grass stalks, reaper, Inventor 3DAbstract
In general, traditional farmers still use the manual method which requires a large number of workers and takes longer for one hectare. With this mechanization, it is hoped that the time and cost at harvest will be faster and cheaper. It is hoped that this harvester can not only be used on one type of grass stalks plant (eg. rice) but can also be used for other types of grass stalks plants (lemongrass, sticky rice, straw). This paper produces a design using Inventor 3D to describe a mechanization system for harvesting grass stalks using a circular harvester. The crucial analysis carried out on the carrier, focuses on three things, namely the estimation of power system requirements, estimation of harvest capacity and system stability. Fits the speed-adjusting lever and the lever adjusts the height of the cutter. In its application can be used on wet land or dry land. The conclusion from the calculation is that the driving force is sufficient to move the body and cutting blades, the design capacity exceeds twice that of the manual method, and in practice the body is still stable when passing through land with an elevation of 30 degrees.
References
Handaka and Joko Pitoyo. 2011. Modification of A Grass Cutter Into A Small Rice Harvester, Indonesian Journal of Agriculture 4(1), 2011: 40- 45
Ida Bagus Komang Edo Setiawan. (2020). Rancang Bangun Unit Pemotong dan Pengarah pada Mesin Panen Padi (Oryza sativa l) Tipe Carry Harvester, Jurnal Beta (Biosistem Dan Teknik Pertanian) Program Studi Teknik Pertanian, Fakultas Teknologi Pertanian Universitas Udayana, Badung, Bali, Indonesia.
Tabatabaee Koloor R., Borgheie A. (2006). Measuring The Static and Dynamic Cutting Force of Stems for Iranian Rice Varieties. J Agric Sci Tech. 8: 193-198.
Rosanti, Dewi. (2013). Morfologi Tumbuhan. Jakarta: Erlangga.
Suprodjo. (1980). Cara-Cara Penentuan Ukuran Utama dari Traktor untuk Pengolahan Tanah. Bagian Mekanisasi Pertanian, Fakultas Teknologi Pertanian Universitas Gadjah Mada. Yogyakarta.
Santosa, M.P. (2008). Manajemen Tenaga Alat dan Mesin Pertanian, Universitas Andalas Padang.
Santosa. (1990). Alat Pengolah Tanah. Jurusan Teknologi Pertanian - Fakultas Pertanian Universitas Andalas Padang.
Heywood, John. (2018). Internal Combustion Engine Fundamentals, 2nd Ed., McGraw-Hill, Inc.
Beer Ferdinand P, Johnston E Russel Jr. (1987). Mechanic for Engineers : Statics and Dynamics, 4th edition. McGraw-Hill, Inc.
Taufiq Rochim. Proses Pemesinan. Jica. (1993).
Esmay M., et al. (1979). Rice Postproduction in the Tropics. The University Press of Hawaii.
Sumardi. (2012). Pembuatan Mesin Pemotong Padi Circular Reaper. Politeknik Negeri Lhokseumawe.
Douthwite, B.,G.R. Quick and C.J.M. Tado. (1993). The Stripper Gatherer system for small- area rice harvesting. Agricultural Engineering Jurnal 2(4): 183.
Poerwanto. (2010). Budidaya Serai Wangi. Balai Penelitian Tanaman Obat dan Aromatik. Bogor.
