MENINGKATKAN EFEKTIVITAS PROSES PURGING ENGINE DIESEL MENGGUNAKAN DIESEL PURGING KIT BERBASIS ARDUINO UNO DI PT ASTRA INTERNATIONAL ISUZU SALES OPERATION CABANG CIPUTAT
DOI:
https://doi.org/10.52453/t.v15i1.370Keywords:
arduino UNO, trouble shooting, diesel engine, diesel purging, turbidity levelAbstract
A diesel engine is a machine known as an internal combustion engine which uses the heat of compression to ignite fuel that has been sprayed by a nozzle into the combustion chamber. The problem that often occurs in Diesel engines is interference with the fuel system. When these disturbances occur, trouble shooting must be carried out on the fuel system and periodic maintenance can be carried out to minimize disturbances to the Diesel engine fuel system. The Arduino Uno-based Diesel purging kit is equipped with digital parameters to read the turbidity level of the purging liquid so that it is expected to facilitate mechanics in the Diesel engine purging process and make it more efficient and effective. The test results show a graphic of turbidity during the first 5 minutes to 20 minutes there is a significant increase in the percentage of liquid turbidity. However, in the last minute of the process there was only an increase of 2% which means that the maximum result of the process touched the turbidity rate of 72%. After the procurement of the tool, the Diesel engine purging process cut the time by 30 minutes compared to before the tool was available
References
R. Syahyuniar, “Kalibrasi Pompa Injeksi Tipe Distributor Dalam Persamaan Aliran Bahan Bakar Engine Diesel | 61 Rusuminto Syahyuniar,” vol. 4, no. 2, 2017.
H. Effendi, A. P. Putra, and D. Sartika, “Kalibrasi Pompa Injeksi Tipe In-Line Dalam Persamaan Volume Bahan Bakar Motor Diesel 4 Silinder,” 2017.
A. D. Cappenberg, “PENGARUH PENGGUNAAN BAHAN BAKAR SOLAR, BIOSOLAR DAN PERTAMINA DEX TERHADAP PRESTASI MOTOR DIESEL SILINDER TUNGGAL.”
Sariffudin, H. Widada, and M. F. A. Hase, “Analisis Menurunnya Kinerja Injektor terhadap Proses Pembakaran Motor Diesel di Kapal,” E-Journal Marine Inside, pp. 31–42, Dec. 2021, doi: 10.56943/ejmi.v3i2.32.
A. Rohermanto, S. Pengajar, J. Teknik, M. Politeknik, and N. Pontianak, “SISTEM ALIRAN BAHAN BAKAR PADA MESIN DIESEL MELALUI PENGATURAN M DEC ( MONITORING AND CONTROL SYSTEM ).”
A. and R. A. Alushkin T. and Zubritskii, “Test Results of Flushing Fluid ``Diesel Purge’’,” in Proceedings of the 8th International Conference on Industrial Engineering, V. R. Radionov Andrey A. and Gasiyarov, Ed., Cham: Springer International Publishing, 2023, pp. 859–868.
M. Alfan Ikhsan, M. Yahya, F. Alif Fiolana, P. Kekeruhan Air di Tandon Rumah Berbasis Arduino Uno, I. Kadiri Jl Sersan Suharmadji No, and K. Kediri Jawa Timur, “PENDETEKSI KEKERUHAN AIR DI TANDON RUMAH BERBASIS ARDUINO UNO,” Jurnal Qua Teknika, vol. 8, no. 2, pp. 17–29, 2018.
H. Leidiyana, H. Priantoro, F. R. Cinda Simatupang, U. Bina Sarana Informatika, and S. Nusa Mandiri, “PERANCANGAN ALAT PENDETEKSI TINGKAT KEKERUHAN AIR KAMAR MANDI MENGGUNAKAN MIKROKONTROLLER ARDUINO NANO,” vol. 7, no. 1, p. 2019.
